Lead Acid Battery

 Lead Acid Battery

The Lead-acid battery is one of the oldest types of rechargeable batteries. These batteries were invented in the year 1859 by the French physicist Gaston Plante. Despite having a small energy-to-volume ratio and a very low energy-to-weight ratio, its ability to supply high surge contents reveals that the cells have a relatively large power-to-weight ratio.


Lead-acid batteries can be classified as secondary batteries. The chemical reactions that occur in secondary cells are reversible. The reactants that generate an electric current in these batteries (via chemical reactions) can be regenerated by passing a current through the battery (recharging).

The chemical process of extracting current from a secondary battery (forward reaction) is called discharging. The method of regenerating active material is called charging.

Chemical Reaction for Discharging
When the battery is discharged, it acts as a galvanic cell and the following chemical reaction occurs.

Negative:

Pb(s) + HSO4– + H2O(l) –> 2e– + PbSO4(s) + H3O+(aq) (oxidation )

Positive:

PbO2(s) + HSO4–(aq) + 3H3O+(aq) + 2e–  –> PbSO4(s) + 5H2O(l) (reduction)

Lead sulfate is formed at both electrodes. Two electrons are also transferred in the complete reaction. The lead-acid battery is packed in a thick rubber or plastic case to prevent leakage of the corrosive sulphuric acid.

Lead Acid Battery Charging

The sulphuric acid existing in the lead discharge battery decomposes and needs to be replaced. Sometimes, the plates change their structure by themselves. Eventually, the battery becomes less efficient and should be charged or changed.

When car batteries spend considerable durations of time in their discharged states, the lead sulfate build-up may become extremely difficult to remove. This is the reason why lead-acid batteries must be charged as soon as possible (to prevent the building up of lead sulfate). Charging of the lead batteries is usually done by providing an external current source.

A plug is inserted which is linked to the lead-acid battery and the chemical reaction proceeds in the opposite direction. In cases where the sulphuric acid in the battery (or some other component of the battery) has undergone decomposition, the charging process may become inefficient. Therefore, it is advisable to check the battery periodically.

Chemical Reaction for Recharging
The chemical reaction that takes place when the lead-acid battery is recharging can be found below.

Negative:

2e– + PbSO4(s) + H3O+(aq) –> Pb(s) + HSO4– + H2O(l) (reduction)

Positive:

PbSO4(s) + 5H2O(l) –> PbO2(s) + HSO4–(aq) + 3H3O+(aq) + 2e– (oxidation)

While recharging, the automobile battery functions like an electrolytic cell. The energy required to drive the recharging comes from an external source, such as an engine of a car. It is also important to note that overcharging of the battery could result in the formation of by-products such as hydrogen gas and oxygen gas. These gases tend to escape from the battery, resulting in the loss of reactants.


Comments

Post a Comment

Popular posts from this blog

Laser Cutting Machine

Laser cutting     is a fabrication process which employs a focused, high-powered   laser beam   to cut material into custom shapes and designs. This process is suitable for a wide range of materials, including metal, plastic, wood, gemstone, glass, and paper, and can produce precise, intricate, and complex parts without the need for custom-designed tooling. There are several different types of laser cutting available, including fusion cutting, oxidation cutting, and scribing. Each laser cutting process can produce parts with precision, accuracy, and high-quality edge finishes, and with generally less material contamination, physical damage, and waste than with other conventional cutting processes, such as mechanical cutting and waterjet cutting. However, while laser cutting demonstrates certain advantages over more conventional cutting processes, some manufacturing applications can be problematic, such as cutting reflective material or material requiring secondary ma...
Read more

Biomechanical engineering

Image
 Biomechanical engineering is a field that integrates principles of mechanical engineering with biological systems, particularly focusing on the interaction between mechanical factors and living organisms. Here are some key aspects and applications of biomechanical engineering: Biomechanics : This involves the study of the mechanical aspects of biological systems, such as how forces affect cells, tissues, and organs. Biomechanical engineers apply principles from mechanics (statics, dynamics, fluid mechanics, etc.) to understand and analyze biological structures and functions. Medical Devices : Biomechanical engineers design and develop medical devices such as prosthetics, implants, orthotics, and assistive devices. These devices aim to improve mobility, enhance bodily functions, or replace damaged biological structures. Tissue Engineering : This field combines engineering principles with biology to create biological substitutes that restore, maintain, or improve tissue function. Bi...
Read more

Coordinate Measuring Machine Probes

Image
  A  Coordinate Measuring Machine  is defined by the ability of its probe. As with CMMs, there are several types of probes available. There is the contact probe, which measures the workpieces by making contact with them. The non-contact probe that employs lasers or machine vision probes which scan with optical sensors. Contact probes are a more accurate way of measuring. However, the laser or machine vision probes are far quicker to use, while still holding a high degree of accuracy. There are also multi-sensor probes which combine both touch and optical scanning, giving the benefit of both types in one probe. Coordinate Measuring Machines: Contact Probes The two most common contact probes are Touch Trigger Probes and Analog Scanning Probes. Touch Trigger Probes: A touch trigger probe has a stylus that is attached to a bearing plate. This is then connected to pressure sensors inside the housing of the probe. Each time the probe makes contact with the workpiece, it generat...
Read more